Listings - Page 2 of 8 - ESM Farm Equipment

3560hrs, 2014 T4.95 dual command 4wd cab tractor with 835TL MSL loader and 84" HV Bucket

10t, 440 cubic ft vertical btr spreader, inside dim.
62"W x 31"D x 206.5"L, 32" btr diameter, 100 pto hp
min., 540 pto, Radial Tire upgrade, Rubber seal kit for
semi solids, Tail light kit with automatic activated
covers

automatic continuous round and square bale wrapper,
round bale up to 6' & sq up 3 x 6, 7600lb base ,weight
added platinum pkg includes wireless plastic sensor
shutdown kit, remote steer/shutdown & includes remote
start, led lights, bale dispatch, 20hp engine, offset
twin wrap, dual power drive, laser guidance

New NH L328 skidsteer, E-H Contol, Cab w/heat and ac,
LCD display, air suspension seat, lap bar, performance pkg, hydraulic coupler, 14x17.5 HD tires, no bucket

5300 hours, front and rear duals, 20.8R50 40%, 16.9R34
20%, Front 3PH, 5 rear remotes, Standard rear fenders,
5000 lb rear wheel weight, 120" Bar Axle, 50KPH CVT,
Leather seats

New Horst scatter shot, single pinner, broadcast
spreader, hydraulic drive, self loading unit, ½ yard
capacity and 3 to 40' spread width, includes hydraulic
hoses and flat faced couplers. Unit width is 48". ssl
q/t

Used open station skidsteer with 6,710 hours, 2 speed eh
pilots, manual coupler, 12x16.5 tires, NH 72" LPE bucket
with bolt on cutting edge, with weight kit

track machine, eh cab control, heat and a/c, LCD
display with backup camera, air ride suspension seat,
demo door, high flow plus pkg, suspension track, no
bucket

Consigned skidsteer, 205 hours,EH controls, LCD displac,
HVAC Cab, Air suspension seat, demo door, lap bar, 1500
hour Michelin Radial14 x 17.5 tires, enhanced high flow,
Hydraulic quick attach, 78" low profile bucket w/cut
edge, glide ride and one way self level Rear hitch and
extended fenders Base Warranty till Sept 28/2025, Esm
has serviced machine

cab, air ride seat, 3 range hydrostat, 12x16.5 front,
17.5x24 rear, 260TLA loader

Consigned Skid Steer, 4480 Hours on the tach, 10x16.5 Tires @30%, ripped seat,
skidsteer is green and white, Hand & Foot controls, 3
year old Horst Q Tach Plate, 64" Bucket, 48" Pallet
Fork, New Battery
Skidsteer Build Date Dec 5 1989

504 pro Gen III roto cut round baler,
hydraulic pick-up, 73" tooth to tooth camless wide p/u ,
5 tooth bars, semi-pneumatic 7.1-16 guage wheels, 540
PTO, radial pin clutch, 17 knives, 21.5L-16.1
floatation, 4 wide endless belts, auto oiler, Atlas pro
control system, 9825lbs, 80 to 110rec., HP, LED lights,
after factory moisture tester

3.5" capacity, gravity feed, Vanguard 14 hp (408 cc), 2
chipper knives, 25" rotor dia, 62" discharge chute
height & 284 degree rotation, Centrifugal Clutch, Belt
Drive, 75lb tongue weight & 773lb machine weight

self feed wood chipper, 3.5" chip capacity, cat I

New NH L328 skidsteer, E-H Contol, Cab w/heat and ac,
LCD display, air suspension seat, lap bar, high flow
aux, hydraulic coupler, 14x17.5 HD tires, no bucket

consigned inline bale wrapper, 13hp honda engine, electric
over hydraulic controls, up to 6' round bales and 3'x3'
square bales

Used 2022 RB450 rotor cutter 2.07 round baler, 5,243
bales, 4x5 cut pkg 2, endless belts, net only, 18L-16.1SL 10 PR, NH moisture sensor, manual and hyd pick up, drop floor, manual rotor reverser

Track machine, eh cab controls, Heat and a/c, LCD
display, air ride susp. seat, high flow plus pkg, no
bucket

silage special, rotocut, 18,964 bales, laced belts in
good shape, RH door is dented, with monitor

rops, 4wd, 2860 hours, 540/1000 pto, FL.3615 self
loader (Alo Q3s),Loader has been reinforced, 3rd
function, no bucket, 88 PTO HP, 12x12 speed power
shuttle, 18.4R30 40%, 13.6R24 10% rear wheel weights &
Fluid

E37C, 3 cyl, 2 speed, cab w/heat & AC, 2 way
aux joystick proportional, long arm, LED working
lights, counter weight, rubber tracks, pattern
change thumb brkt, travel alarm, no bkt,

as is 4 wheel steer, universal pads, lights, 26x12 tires

New Wallenstein Stump grinder, PTO drive, 25-80hp
tractor required, 25" rotor diameter